The Tourpack consists of two ETEC FX1 SPARK MACHINE, one ETEC Flightcase and two bags of Spark Granules each 200g.
The ETEC FX1 SPARK MACHINE is a pyrotechnic effect that is very impressive, thanks to the granules specially developed for the machine, the FX1 SPARK MACHINE can generate a spray fountain of up to 5 meters in height. The sparks emanating from the ETEC machine are cold sparks. Thus, the sparks are therefore completely harmless to combustible materials such as e.g. for fabrics. This means that the ETEC FX1 SPARK MACHINE can be operated almost anywhere without permits.
In addition, the machine uses the ETEC granulate silently, smokeless and odorless. Therefore, the ETEC FX1 SPARK MACHINE is ideally suited for the following events:
- Gala events
- school plays
The ETEC FX1 SPARK MACHINE can easily be controlled via DMX (2 channels) or via the included remote control. Also on the device itself, the FX1 Spark can be set quickly and easily. No license is required to operate the FX1 SPARK MACHINE because it is not pyrotechnic.
To operate the ETEC FX1 SPARK MACHINE you need Spark Granules 200g (article number E5000255).
Voltage: AC 220-240 V 50/60 Hz
Power consumption: 700 watts
up to a maximum of 15 minutes continuous ejection
per powder filling up to 15 min effect
Output: 1-5 m height
Consumption: 14 g / min
Warm-up time: 8 min
Control: DMX512 or remote control
Number of DMX channels: 2
P-Con: input / output
3-pin DMX: input / output
Dimensions (LxWxH): 240 x 248 x 326 mm
Weight: 11.6 kg
The Flightcase is a suitable transport case for two ETEC FX1 SPARK MACHINE.
for 2 ETEC FX1 SPARK MACHINE
30 x 30 mm aluminum edge
2 medium-sized spring-loaded butterfly closures
2 folding handles
Outside dimensions (WxDxH): approx. 500 x 390 x 360 mm
Weight: about 7 kg
specially made granules for the ETEC FX1 SPARK MACHINE
can generate spray fountains up to 4 meters high
is enough for about 14 minutes
Amount: 200 g